please consider the following for the next version of the firmware:
1) as a motorized (USALS) setup owner, I would suggest
that the dish should be moved only after selecting a channel to watch,
and not before, for example when browsing channels/satellites
or switching to the channel list for a specific satellite (yellow button).
This would greatly reduce the stress on the dish motor.
2) in the same area as above, all satellites, including those inserted by the user,
should be ordered by their orbital position. Satellite editing should include
changing the satellite number, in order to be able to order the satellites according to their orbital position,
as right now they remain in the order they were originally configured by the user;
3) In the DVPPlayer app, adding a new satellite should allow the user to set the dish setup (DISEQC o USALS),
as it is possible on the receiver;
4) if possible, add the possibility to set channels (streams)
from the Live section as favorite channels;
5) make net clients, especially newcamd, properly forward EMMs to the server, so that an official provider card owned by the user is able to update decrypting keys
(http://www.freedvb.com/viewtopic.php?t=18353#p22052);
Probably, more are coming
Also, please remember my previous suggestions:
a) playing Internet radios by the M3U app
b) ssh server support
c) 27.5W 11495V support.
Thank you in advance.
