FreeDVB

Dear Friends,

Installation Process Of HelloBox Software Update/Upgrade By UBoot Method

Here many friends now this installation process
But I am once more time explaining it.

Now , You can try UBoot Update/Upgrade Method Also

1) Take Empty USB Storage/Pen Drive (FAT32).

In USB Storage/ Pen Drive don't keep any kind of data except Software File(auto_burn.fac).

2) Paste Software File In USB Storage/Pen Drive

3) Rename File As auto_burn.fac

4) Power Off Set Top Box

5) Connect USB Storage/Pen Drive To Receiver Box
Then Power On.

6) During Process do not Power Off or
Do not Remove USB Storage.
After Completing Process Now,
Front Panel Shows 100 And Then Shows FFFF Now remove USB Storage.

7) Wait For Few Seconds Receiver Box Restart Itself If not restarted itself Then only
you can Manually Restart Receiver Box

8) Finally Your Set Top Box / Receiver Box Got Successfully Updated.


Alternatives of this installation method

You can Upgrade/Update By
1)USB Storage/Pen Drive (By Inbuilt Upgrade Option)
2)RS232 Serial Port
3)CH341A Programmer
And Many more.