Page 1 of 2
RS232 upgrade tool for Hellobox V5
Posted: Sun Dec 23, 2018 2:27 am
by DVBFinder
Re: RS232 upgrade tool for Hellobox V5
Posted: Thu Feb 07, 2019 3:46 pm
by kot
this flashing sw alive my dead Hellobox V5, thanks a lot
Re: RS232 upgrade tool for Hellobox V5
Posted: Mon Sep 02, 2019 4:28 pm
by 7zawhtay
How did u do it?
Step by step please.
Re: RS232 upgrade tool for Hellobox V5
Posted: Mon Sep 02, 2019 4:54 pm
by 7zawhtay
I also flash with rs232 and it just showed.
Re: RS232 upgrade tool for Hellobox V5
Posted: Mon Sep 02, 2019 5:16 pm
by car mel
Re: RS232 upgrade tool for Hellobox V5
Posted: Sun Dec 01, 2019 12:23 am
by hanwool
upgrade tool fo hellobox V5 and V5 plus are different, please renew link downlod tool
Re: RS232 upgrade tool for Hellobox V5
Posted: Mon Dec 09, 2019 6:11 pm
by tekmed
Re: RS232 upgrade tool for Hellobox V5
Posted: Mon Dec 09, 2019 6:13 pm
by tekmed
hanwool wrote: ↑Sun Dec 01, 2019 12:23 am
upgrade tool fo hellobox V5 and V5 plus are different, please renew link downlod tool
Tool is here
http://www.pctvlab.com/gsky/software/V5_upg_tool.rar
Re: RS232 upgrade tool for Hellobox V5
Posted: Sat Dec 28, 2019 5:19 am
by elanimal19
ineed help
Serial Port Opened
monitor start
download start
Please reboot the STB manually.
Change baudrate to 115200.
monitor stop
Sync Succeed.
Sending boot init...
Send boot init completed.
boot init run successfully.
SendClient.
Sending Client is complete.
Client is up.
Client Functionality is good.
uboot run successful
download successful!
monitor start
usb start;fatload usb 0 83000000 hellobox.bin;sf burn 83000000 0 400000;
(Re)start USB...
auto_detect_usb_port --- usb default sel port 1
port_sts0:0x00000803 port_sts1:0x00000803
auto_detect_usb_port --- usb sel port 1
USB: usb_debug
need usb1 plug in....
usb1 device connect port status :0x1803
port1 reset down port status :0x8001205
ehci_hcd_init...
Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
scanning bus for ethernet devices... 0 Ethernet Device(s) found
** Unable to use usb 0:1 for fatload **
do_spi_flash_uboot_save offset[0] len[2d600000]
spi0 is already setup!!!
SF: spi flash status register: 0x00, 0x00
SPI: Detected EN25Q32B with erase size 64 KiB, total 4 MiB
Re: RS232 upgrade tool for Hellobox V5
Posted: Mon Feb 03, 2020 1:57 pm
by Vishnu
Use CH341a mini programmer with aligator clip.very easy to program.my hellobox v5 hd was dead while try to connecting wifi adaptor.i tried win stb software but unable to recover. then tried CH341 a,It recovered.