We need a full-fledged 7-day EPG, not cut to the current + next EPG program.

Post Reply
edzus1
T3
T3
Posts: 59
Joined: Fri Apr 24, 2020 3:23 pm

We need a full-fledged 7-day EPG, not cut to the current + next EPG program.

Post by edzus1 » Mon Jun 22, 2020 10:25 am

Make a full-fledged 7-day EPG, and not the EPG that right now in Hellobox 8 has the current + next EPG program cropped.
With a full 7-day EPG, additional functionality will be added for the Hellobox 8 user:
1. watching a TV program up to 7 days + a short description of the TV program (depending on the channel if the EPG is included in the broadcast signal), rather than looking for a TV program on the Internet or somewhere to know which TV program is expected in the middle of the day or the next day.
2. the ability to program a TV program on the timer from the EPG for the current day, the next day ... until the end of the week (until the seventh day) (depending on the channel - if the signal contains EPG)

Another small timer suggestion:
1. Add to the timer mode (Play. Record, Record & Standby) another Standby mode. Which can be used as a sleep timer or if you use a timer in Play mode or turn on several timers at one time and then switch to another channel by timer with an interval of minutes, then after the second timer ends, Hellobox 8 switches to the last channel before the timer starts. In the presence of the Standby timer mode, it was possible to program so that after the last Hellobox 8 timer, it would go into standby mode and not remain in the on mode.
2. Add the Weekly mode selection by day of the week (with the choice of the day Monday - Sunday (for each day of the week it was possible to put a tick)). To implement this option, you need to slightly modify the clock - so that it recognizes the day of the week. If the timer has this option, then the Hellobox 8 user can get rid of duplicate Weekly timers that are programmed for different days at the same time.



P.S.
I have Hellobox 8 NEW

User avatar
fenddick
Moderator
Moderator
Posts: 747
Joined: Mon Dec 24, 2018 10:03 am

Re: We need a full-fledged 7-day EPG, not cut to the current + next EPG program.

Post by fenddick » Tue Jun 23, 2020 5:34 am

edzus1 wrote:
Mon Jun 22, 2020 10:25 am
Make a full-fledged 7-day EPG, and not the EPG that right now in Hellobox 8 has the current + next EPG program cropped.
With a full 7-day EPG, additional functionality will be added for the Hellobox 8 user:
1. watching a TV program up to 7 days + a short description of the TV program (depending on the channel if the EPG is included in the broadcast signal), rather than looking for a TV program on the Internet or somewhere to know which TV program is expected in the middle of the day or the next day.
2. the ability to program a TV program on the timer from the EPG for the current day, the next day ... until the end of the week (until the seventh day) (depending on the channel - if the signal contains EPG)

Another small timer suggestion:
1. Add to the timer mode (Play. Record, Record & Standby) another Standby mode. Which can be used as a sleep timer or if you use a timer in Play mode or turn on several timers at one time and then switch to another channel by timer with an interval of minutes, then after the second timer ends, Hellobox 8 switches to the last channel before the timer starts. In the presence of the Standby timer mode, it was possible to program so that after the last Hellobox 8 timer, it would go into standby mode and not remain in the on mode.
2. Add the Weekly mode selection by day of the week (with the choice of the day Monday - Sunday (for each day of the week it was possible to put a tick)). To implement this option, you need to slightly modify the clock - so that it recognizes the day of the week. If the timer has this option, then the Hellobox 8 user can get rid of duplicate Weekly timers that are programmed for different days at the same time.



P.S.
I have Hellobox 8 NEW
Thank you for your advice,it's good idea.
Image

User avatar
scollrocker
T2
T2
Posts: 24
Joined: Wed Jun 10, 2020 7:27 am

Re: We need a full-fledged 7-day EPG, not cut to the current + next EPG program.

Post by scollrocker » Thu Jun 25, 2020 1:38 pm

Please update new firmware for this function. WE NEED IT like other premium receiver. If better it can set reminder for next program and auto can go to next program if there another channel. Please fix the name recording, example : (Channel Name)(Program Name)(Date/Time). Sample : TV3 HD-THE JUNGLE BOOK (2016)(28052020_14.00). This is better. Right now, the name recording (Channel Name)(Date)(Time). Please Fix immediately. TQ

User avatar
fenddick
Moderator
Moderator
Posts: 747
Joined: Mon Dec 24, 2018 10:03 am

Re: We need a full-fledged 7-day EPG, not cut to the current + next EPG program.

Post by fenddick » Sun Jun 28, 2020 6:57 am

scollrocker wrote:
Thu Jun 25, 2020 1:38 pm
Please update new firmware for this function. WE NEED IT like other premium receiver. If better it can set reminder for next program and auto can go to next program if there another channel. Please fix the name recording, example : (Channel Name)(Program Name)(Date/Time). Sample : TV3 HD-THE JUNGLE BOOK (2016)(28052020_14.00). This is better. Right now, the name recording (Channel Name)(Date)(Time). Please Fix immediately. TQ
You can enter EPG menu to set reminders.
The name recording,it's good idea.
Image

Post Reply