Hellobox 6 firmware release 20201228

User avatar
gxu
Designer
Designer
Posts: 132
Joined: Mon Dec 24, 2018 3:12 am

Re: Hellobox 6 firmware release 20201228

Post by gxu » Wed Dec 30, 2020 2:32 am

Ahamed NIFRI wrote:
Tue Dec 29, 2020 12:07 pm
Videocon (88E) working only after off CW check.
But this time all sat are freezing ( mostly cline opening channels 45E,88E and 108.2E)

But normally all sat working perfectly ON after CW check

SO can't watch 88E and 108.2E at the same time
So please fix this issue immediately

Note:- this issue mostly have cline user
try this version, problem fixed. no need to disable cw check

Ahamed NIFRI
T1
T1
Posts: 11
Joined: Sun Jul 14, 2019 2:27 pm

Re: Hellobox 6 firmware release 20201228

Post by Ahamed NIFRI » Wed Dec 30, 2020 3:40 am

gxu wrote:
Wed Dec 30, 2020 2:32 am
Ahamed NIFRI wrote:
Tue Dec 29, 2020 12:07 pm
Videocon (88E) working only after off CW check.
But this time all sat are freezing ( mostly cline opening channels 45E,88E and 108.2E)

But normally all sat working perfectly ON after CW check

SO can't watch 88E and 108.2E at the same time
So please fix this issue immediately

Note:- this issue mostly have cline user
try this version, problem fixed. no need to disable cw check
Yes, it's correct
Now perfectly working 108.2E and 45E but 88E freezing 2s to 2s
Can't watch 88E
Every time to time freez

zohazoha
T1
T1
Posts: 7
Joined: Sun Jul 07, 2019 6:00 pm

Re: Hellobox 6 firmware release 20201228

Post by zohazoha » Thu Dec 31, 2020 6:32 pm

Sir, the update will work on V5 plus if yes then kindly update the procedure .
Regards.

zohazoha
T1
T1
Posts: 7
Joined: Sun Jul 07, 2019 6:00 pm

Re: Hellobox 6 firmware release 20201228

Post by zohazoha » Fri Jan 01, 2021 6:47 pm

Sir, the update will work on V5 plus if yes then kindly update the procedure .
Regards.

car mel
T4
T4
Posts: 146
Joined: Mon Jan 21, 2019 7:50 pm

Re: Hellobox 6 firmware release 20201228

Post by car mel » Sat Jan 02, 2021 3:08 am

After few days testing I have found CA Expansion Key Edit space limited to 600 quantity. Loading a Softcam with more than that will be cut to 600. After that and without room on memory the Auto Biss on new channels will not work not posible to add it. Please increase size of maximum keys to store. Thanks
Last edited by car mel on Sat Jan 02, 2021 9:45 pm, edited 1 time in total.
SAM I 10'- Dreambox DM800HDse-Hellobox-GTMedia
Scanning the arc from 43w to 133w

skidzz
T1
T1
Posts: 8
Joined: Mon Aug 05, 2019 5:28 am

Re: Hellobox 6 firmware release 20201228

Post by skidzz » Sat Jan 02, 2021 8:00 am

fenddick wrote:
Tue Dec 29, 2020 7:41 am
  • update youtube
  • add ts delay
  • fix some bugs
Thankyou Sir....🙏👍

elvv
T2
T2
Posts: 20
Joined: Thu Jul 09, 2020 2:26 pm

Re: Hellobox 6 firmware release 20201228

Post by elvv » Sat Jan 02, 2021 3:23 pm

It did not open 3966 H tp 43.1w AE10CAmericas & Europe auto PV.

devrat10
T2
T2
Posts: 21
Joined: Fri Sep 20, 2019 9:36 am

Re: Hellobox 6 firmware release 20201228

Post by devrat10 » Sat Jan 02, 2021 10:23 pm

helloboxv5 plus uydu alıcısına usbden yazılım atarken elektirikler kesildi şimdi hiç açılmıyor hiç bir ışığı yanmıyor güç kaynağını değişdirdim sonuç aynı ne yapmam gerekir

dhk
T3
T3
Posts: 62
Joined: Fri Aug 23, 2019 8:42 am

Re: Hellobox 6 firmware release 20201228

Post by dhk » Mon Jan 04, 2021 10:54 am

fenddick wrote:
Tue Dec 29, 2020 7:41 am
  • update youtube
  • add ts delay
  • fix some bugs
Hi fenddick,

Now SCAM+ has become terrible. 45edialog, 108e and 88e freezing too much these days. And theyare focusing on 108e which freezes every few secs instead of 88e which is relatevly smooth.


Pleasefocus on hellobox buyers and improve the speed, coverage and stability of scam+ on 45e and 88e atleaste for Sri lankan buyers.

Ahamed NIFRI
T1
T1
Posts: 11
Joined: Sun Jul 14, 2019 2:27 pm

Re: Hellobox 6 firmware release 20201228

Post by Ahamed NIFRI » Wed Jan 06, 2021 9:34 am

Ahamed NIFRI wrote:
Wed Dec 30, 2020 3:40 am
gxu wrote:
Wed Dec 30, 2020 2:32 am
Ahamed NIFRI wrote:
Tue Dec 29, 2020 12:07 pm
Videocon (88E) working only after off CW check.
But this time all sat are freezing ( mostly cline opening channels 45E,88E and 108.2E)

But normally all sat working perfectly ON after CW check


SO can't watch 88E and 108.2E at the same time
So please fix this issue immediately

Note:- this issue mostly have cline user
try this version, problem fixed. no need to disable cw check
Yes, it's correct
Now perfectly working 108.2E and 45E but 88E freezing 2s to 2s
Can't watch 88E
Every time to time freez
Why still not respond for the admin


Can't watch 88E
2s to 2s freezing

Post Reply