how to upgrade Hellobox V5 plus through RS232 serial port?

[koaung.keypro]

Hello.please we are hello box v5 hd machine Sun Tv next tv lile not Open so we how to do it? Please help me. Thank you

[Jass thind]

How to upgrade hello box v6 by rs232 cable

[Jass thind]

How to upgrade hello box v6 by rs232 cable

[Vinodjangird]

Pls renew the link
Link is not working

[WilliamNeivy]

Im trying to control PMAC through serial port from a terminal. I tried different terminals, successful with some, e.g., Tera Term, and unsuccessful with others. It seems its due to the terminator sent at the end of the command. Whats the correct format for the command sent and status read back?

[IDSOLA]

"can't sync with btinit_ddr2_400m_debug.img"

I am getting the above in the process of waking up a dead V5plus that has been upgraded to Hellobox6.
Kindly help with solution

[car mel]

"can't sync with btinit_ddr2_400m_debug.img"

I am getting the above in the process of waking up a dead V5plus that has been upgraded to Hellobox6.
Kindly help with solution

Use flashing CH341A

Make sure the com port is set to 115200 , Rename the dumped bin file to hellobox_v5_plus.bin

Use Cross null RS232 cable

[sunny09]

1. Copy bin file to a USB device and change to the file name to "hellobox _ V5 _plus.bin"
2. Insert the USB device to Hellobox V5 Plus Support and receiver
3. Connect Hellobox V5 plus with computer through RS232 cable
4. Run "WinSTBUpgrader.exe "on computer
5. Select and Open serial port
6. Click" download "page, select the config file " V5 _plus_8M.xml "
7. Click" Start "
8. Power on Hellobox V5 plus, and wait ...
After upgrading is done, Hellobox V5 plus will reboot automatically.

Please enjoy and download the tool RS232 here :
https://my.pcloud.com/publink/show?code ... CQs8yxQ6SX

It's an invalid link 'code'.
Please provide the proper link thanks

[sunny09]

1. Copy bin file to a USB device and change to the file name to "hellobox _ V5 _plus.bin"
2. Insert the USB device to Hellobox V5 Plus Support and receiver
3. Connect Hellobox V5 plus with computer through RS232 cable
4. Run "WinSTBUpgrader.exe "on computer
5. Select and Open serial port
6. Click" download "page, select the config file " V5 _plus_8M.xml "
7. Click" Start "
8. Power on Hellobox V5 plus, and wait ...
After upgrading is done, Hellobox V5 plus will reboot automatically.

Please enjoy and download the tool RS232 here :
https://my.pcloud.com/publink/show?code ... CQs8yxQ6SX

It's an invalid link 'code'.
Please provide the proper link thanks

Help me please

[sunny09]

Anybody can send the file